2  ATERIALS AND METHODS 
2.1  Materials and Reagents 
Earthworms  (E.  fetida)  were  purchased  from  an 
earthworm  cultivating  farm  (Tianjin,  China). 
Dinotefuran (98.0%) were provided by the ministry 
of  agriculture  pesticide  identification. 
R-(-)-dinotefuran  and  S-(+)-dinotefuran  were 
prepared  in  our  laboratory.  The  experimental  soil 
was  artificial  soil  and  prepared  according  to  the 
method  described  in  the  OECD  guideline  (
OECD, 
2014)
. 
2.2  Acute Toxicity Testing using 
Earthworm E.fetida 
The  acute  toxicity  was  conducted  according  to  the 
OECD  standard  method  (
OECD,  2014)
.  For  the 
media  lethal  concentrations  (LC
50
)  of 
Rac-(±)-Dinotefuran and its enantiomers caculation, 
seven  test  concentrations  were  used, 
Rac-(±)-Dinotefuran  (0.829,  1.077,  1.401,  1.821, 
2.367,  3.077  and  4.000  mg/kg),  S-(+)-Dinotefuran 
(0.491,  0.638,  0.829,  1.077,  1.401  1.821  and  2.367 
mg/kg)  and  R-(-)-Dinotefuran  (2.072,  2.693,  3.501, 
4.552,  5.917,  7.692  and  10.000  mg/kg).  Each 
concentration  contained  ten  healthy  earthworm  and 
with three replicates.   
2.3  Experimental Design 
Based on the acute toxicity experiment results, three 
different concentrations (0.1, 0.5 and 1.0 mg/kg) and 
three replicates for each concentration with artificial 
soil  were  used  in  the  present  study.  The  control 
groups  were  prepared  similarly  but  without 
insecticide.  There  are  0.5  g  of  dry  cow  dung  was 
added  onto  the  artificial  soil  surface  weekly  from 
days  1  to  28  and  the  same  dose  of  artificial  soils 
were replaced on  the days of 14. All  the treatments 
were cultured at 20±1 ℃ in 80 %-85 % relative 
humidity for 16 h  in light and 8  h  in  the  dark, and 
five  exposure  periods  (3,  7,  14,  21  and  28  d)  were 
tested.  Each  earthworm  was  washed  with  distilled 
water, gently dried with absorbent paper, and stored 
at -80 ℃ before analysis. 
2.4  Determination of Enzyme Activities   
One Gut-cleaned earthworm was randomly selected 
and homogenized in 100 mM phosphate buffer (pH 
7.2).  The  supernatant  was  collected  after 
centrifuging at 10000 rpm for 30 min (at 4 ℃). SOD 
activity  was  tested  according  with  the  method  of 
Song  et  al.  (
Song,  2009)
.  CAT  activity  was 
determined by  measuring  the consumption of H
2
O
2 
(
Xu, 1997)
. POD activity was determined using the 
method of Kochba et al. (
Kochba, 1977)
.   
2.5  Comet Assay 
Earthworm  coelomocytes  were  performed  as 
Eyambe  et  al.  Described  (
Eyambe,  1991)
.  The 
comet assay was described by the method of Mahsa 
et al. (
Mahsa,  2014)
, which was used to determine 
the  degree  of  DNA  damage.  After  electrophoresis, 
each  slide  was  neutralized  with  neutralizing  buffer 
every  5  min  for  3  times,  dehydrated  with  95  % 
ethanol  and  stained  with  SYBR  green.  At  last,  the 
slides were observed under fluorescence microscope 
(Olympus, BX51, Japan). 
2.6  Real-time PCR Analysis 
Total  RNA  was  obtained  using  the  Total  RNA 
extraction  kit  and  reverse-transcribed  to  first-strand 
cDNA  was  performed  using  the  PrimeScript™  RT 
reagent  Kitr.  The  synthesized  cDNA  was  stored  at 
-80  ℃  prior  to  use  for  real-time  PCR.  TransStart 
Top  Green  qPCR  SuperMix  was  used  in  real-time 
PCR  experiments,  which  was  performed  on  a 
real-time PCR system. The expression of five target 
genes (SOD, MT, HSP70, TCTP) were compared to 
the  expression  of  the  housekeeping  gene  (β-actin) 
and presented as relative gene expression compared 
to  the  control.  The  relative  gene  expression  level 
was  calculated  using  the  2
-
△△
Ct
  method  (
Lukkari, 
2004)
.   
2.7  Statistical Analysis 
Each  treatment  was  analyzed  with  three  replicates. 
The  data  were  analyzed  with  SPSS  17.0  statistical 
software  and  the  results  were  presented  as 
means
± standard deviation (SD). The comet images 
were  analyzed  using  CASP  software.  Olive  tail 
moment  (OTM)  value  was  used  to  determine  the 
degree of DAN damage.